Product Description
Adjustable V-Belt for Taper Bushes Solid Hub SPA Spb Spc Spz Belt Custom made Crankshaft Tensi1r Taper Bushed Sheave Loafer Grooved Belts Pulley
pulley machine
1) V-Belt pulleys for taper bushes
SPZ
|
SPA
|
SPB
|
SPC
|
2)V-belt pulleys with reliable hub
SPZ
|
SPA
|
SPB
|
SPC
|
3) Adjustable Velocity V-belt pulleys prebored and for taper bushes
Kind | Profile |
5VS092-one | 10X6 SPZ |
5VS093-one | 10X6 13X8 |
5VS108-1 | 10X6 13X8 SPZ SPA |
5VS120-one | 10X6 13X8 SPZ SPA |
5VS138-one | 10X6 13X8 SPZ SPA |
5VS159-one | 10X8 SPA |
5VS180-1 | 10X8 17X11 SPA SPB |
5VS120-two | 10X6 thirteen X8 SPZ SPA |
5VS138-2 | 10X6 thirteen X8 SPZ SPA |
5VS159-2 | 13X8 SPA |
5VS180-2 | 13X8 17X11 SPA SPB |
5VS200-two | 13X8 17X11 SPA SPB |
5VS250-two | 13X8 17X11 SPA SPB SPC |
Clean the shaft, the internal and outer holes of the bushing, and the inner hole of the hub. Take away any oil, paint or grime, spot the bushing on the hub, and match the 50 % holes to make full holes (every total hole will only be threaded on one particular aspect). Flippantly oil the threads and points of set screws or the threads and heads of cap screws. Loosely location the screws in the threaded holes on the hub side. Make confident the bushing is free on the hub. Snap the assembly onto the shaft and situation it in the desired placement. Tighten the screws alternately and evenly until finally all are limited 5. Hammer the large end of the bushing with a hammer and block or socket to avoid damage. The screw can now be turned somewhat to the specified torque setting. Repeat this alternating hammering and screw retightening right up until the specified torque is arrived at. Fill all holes with grease to take away filth.
Locking bushings are the most practical and inexpensive method of securing a component to a mating shaft with out the use of any unique tools. Tapered bushings speedily align or lock a pulley, sprocket, or toothed coupling to the drive shaft. Tapered bushings are currently geared up with the essential holes, keyways, tapped holes, and set screws, saving time and money in the course of machining. Tapered locking bushings are reusable right after replacement, and EP gives not only a variety of common bushings but also custom metric or imperial bores or keyways to meet customer-distinct demands. Bushings are made of steel or forged iron.