Item Description

CZPT Equipment provides a wide variety of substantial quality Timing Belt Pulleys and Toothed Bars/ Timing Bars. Common and non-standard pulleys according to drawings are accessible.

 
Sorts of material:
  1. AlCuMgPb 6061 6082 Aluminum Timing Pulley
  2. C45E 1045 S45C Carbon Metal Timing Pulley
  3. GG25 HT250 Forged Iron Timing Pulley
  4. SUS303 SUS304 AISI431 Stainless Metal Timing Pulley
  5. Other material on need,  this sort of as cooper,  bronze and plastic
 
Varieties of floor treatment
 1.  Anodized surface area -Aluminum Pulleys
 2.  Hard anodized area — Aluminum Pulleys
 3.  Black Oxidized surface area — Steel Pulleys
 4. Zinc plated area — Steel Pulleys
 5. Chromate surface area — Steel Pulleys Cast Iron Pulleys
 6. Nickel plated surface –Metal Pulleys Solid Iron Pulleys
 
Types of enamel profile

 
Sorts of pitches and sizes

Imperial Inch Timing Belt Pulley,
1.     Pilot Bore MXL571 for 6.35mm timing belt enamel number from sixteen to 72
two.  Pilot Bore XL037 for 9.53mm timing belt enamel amount from ten to seventy two
three.  Pilot Bore, Taper Bore L050 for 12.7mm timing belt teeth number from ten to 120
4.  Pilot Bore, Taper Bore L075 for 19.05mm timing belt teeth variety from 10 to one hundred twenty
5.  Pilot Bore, Taper Bore L100 for twenty five.4mm timing belt tooth number from 10 to one hundred twenty
six.  Pilot Bore, Taper Bore H075 for 19.05mm timing belt tooth number from 14 to fifty
seven.  Pilot Bore, Taper Bore H100 for 25.4mm timing belt enamel quantity from fourteen to 156
eight.  Pilot Bore, Taper Bore H150 for 38.1mm timing belt teeth variety from 14 to 156
9.  Pilot Bore, Taper Bore H200 for fifty.8mm timing belt enamel number from 14 to 156
ten.  Pilot Bore, Taper Bore H300 for 76.2mm timing belt tooth quantity from fourteen to 156
eleven.  Taper Bore XH200 for fifty.8mm timing belt teeth variety from eighteen to a hundred and twenty
12.  Taper Bore XH300 for seventy six.2mm timing belt enamel amount from eighteen to a hundred and twenty
13.  Taper Bore XH400 for a hundred and one.6mm timing belt tooth quantity from 18 to 120

Metric Timing Belt Pulley T and AT
one.  Pilot Bore T2.5-16 for 6mm timing belt tooth quantity from 12 to 60 
2.   Pilot Bore T5-21 for 10mm timing belt enamel quantity from ten to 60 
three.   Pilot Bore T5-27 for 16mm timing belt teeth number from ten to 60 
four.   Pilot Bore T5-36 for 25mm timing belt tooth variety from ten to 60 
5.   Pilot Bore T10-31 for 16mm timing belt enamel quantity from 12 to 60 
six.   Pilot Bore T10-40 for 25mm timing belt enamel quantity from twelve to 60 
7.   Pilot Bore T10-47 for 32mm timing belt teeth quantity from 18 to 60 
8.   Pilot Bore T10-66 for 50mm timing belt tooth variety from 18 to 60
9.  Pilot Bore AT5-21 for 10mm timing belt enamel quantity from 12 to sixty
ten. Pilot Bore AT5-27 for 16mm timing belt enamel number from 12 to 60
eleven. Pilot Bore AT5-36 for 25mm timing belt teeth amount from 12 to 60 
12. Pilot Bore AT10-31 for 16mm timing belt enamel amount from 15 to 60 
13. Pilot Bore AT10-40 for 25mm timing belt teeth quantity from fifteen to 60 
14. Pilot Bore AT10-47 for 32mm timing belt enamel number from 18 to 60 
fifteen. Pilot Bore AT10-66 for 50mm timing belt teeth amount from 18 to sixty
  
Metric Timing Belt Pulley HTD3M, 5M, 8M, 14M 
one.  HTD3M-06 3M-09 3M-15 teeth amount from 10 to 72 
2.  HTD5M-09 5M-fifteen 5M-twenty five tooth variety from 12 to 72 
three.  HTD8M-20 8M-thirty 8M-fifty 8M-eighty five tooth variety from 22 to 192 
4.  HTD14M-forty 14M-55 14M-eighty five 14M-115 14M-170 tooth variety from 28-216 
5.  Taper Bore HTD5M-fifteen 8M-twenty 8M-thirty 8M-50 8M-eighty five 14M-40 14M-55 14M-85
         14M-115 14M-one hundred seventy

Metric Timing Belt Pulleys for Poly Chain GT2 Belts 
1.      PCGT8M-12 PCGT8M-21 PCGT8M-36 PCGT8M-62 
two.      PCGT14M-twenty PCGT14M-37 PCGT14M-sixty eight PCGT14M-ninety PCGT14M-one hundred twenty five

Energy Grip CZPT Tooth/ PGGT 2GT, 3GT and 5GT 
one. 2GT-06, 2GT-09 for timing belt width 6mm and 9mm 
2. 3GT-09, 3GT-15 for timing belt width 9mm and 15mm 
three. 5GT-fifteen, 5GT-25 for timing belt width 15mm and 25mm

OMEGA RPP HTD Timing Pulleys 
1.   RPP3M-06 3M-09 3M-fifteen teeth number from 10 to 72 
two.   RPP5M-09 5M-15 5M-25 tooth amount from twelve to 72 
three.   RPP8M-20 8M-30 8M-fifty 8M-85 tooth amount from 22 to 192 
four.   RPP14M-forty 14M-fifty five 14M-eighty five 14M-a hundred and fifteen 14M-a hundred and seventy tooth quantity from 28-216 
five.  Taper Bore RPP5M-15 8M-twenty 8M-30 8M-50 8M-85 14M-40 14M-55 14M-eighty five
     14M-one hundred fifteen 14M-one hundred seventy

###

###

###

###

###

###

###

###

Types of Pulley Systems

If you’ve ever tried to lift a pail of water, you’ve probably seen the pulley system in action. Pulleys are extremely useful tools for everything from household appliances to heavy industrial machinery. Different kinds of pulley systems are classified according to their amount of motion. Some types have fixed axes, while others have movable axes. Some common uses of pulleys are listed below.

two-wheel pulley

Pulleys are complex structures with thin-walled and thick-walled sections. Therefore, they require specific forging designs. The tool concept for the production of pulleys is shown in Figure 11.6. Using the generated tool, the pulley can be forged into different shapes. Process parameters must be optimized based on material, surface quality and metallographic analysis.
Pulleys are wheels mounted on shafts. Its main function is to assist the movement of heavy objects. A single-wheel pulley can change the direction of the force, enabling a person to pull heavy objects. A dual-wheel pulley distributes the weight evenly across both wheels, allowing it to lift the same weight with half the effort.
The mechanical advantage of a two-wheel pulley is that it reduces the force required by about half. A 100 kg object can be lifted with a force of 500 Newtons. The mechanical advantage of a pulley with two wheels is twice that of a single-wheel pulley. However, care should always be taken when using two-wheel pulleys.
Two-wheel pulleys can be fixed or movable. A single wheel pulley can only change direction when the load is placed on one side of the wheel. Two-wheel pulleys change direction when lifting a load, requiring half the force. Live wheels are better for heavier loads. The movable pulley can be adjusted with the load, and the load distribution is more uniform. Active pulleys can be used with single-rope or two-wheel pulleys.
A pulley system with two wheels is called a compound pulley. This type of pulley system has a complex design that reduces the force required to move the load. Two-wheel pulleys are common in industrial and construction environments. These pulleys require a lot of space to install and operate. Additionally, they require regular maintenance to avoid wear and tear.

composite pulley

Compound pulleys are used to increase lift. One fixed pulley is attached to the overhead while the other fixed pulley is attached to the load. This setup minimizes the force required to lift weights, allowing you to lift heavier weights. There are several different types of compound pulleys, each with their own strengths and weaknesses. Below are some examples of their application. Some of the most common are listed below.
Composite pulleys are usually made from two different types of wheels. The first one is fixed and secure. The second type, movable, is attached to something that moves. The third type, compound pulley, is a combination of a movable pulley and a fixed pulley. Below are three types of comparisons. The table below compares them and explains their advantages and disadvantages. Composite pulleys are the most versatile of the three.
The number of sheave segments that make up the composite sheave system increases the mechanical advantage of the system. Each segment adds one percent of the total weight, and the ideal mechanical advantage is two or more. So a compound pulley with four segments will lift three-quarters of the weight. This is because the force applied to the load is multiplied by four. The result is a better boost.
While composite pulleys have many uses, they are most commonly used on larger sailboats. These pulleys work by changing the direction of the control wire or by changing the mechanical force of the rope. They also make it easier to lift heavier objects. Composite pulleys are more expensive than simple pulleys, so consider your needs before buying. The advantages of composite pulleys outweigh the disadvantages.
A basic compound pulley is a device consisting of two wheels with fixed points. Ropes are looped around the wheels and are used to lift heavy objects. When you pull on the rope, the rope pulls the two wheels closer together. Serious injury could result if this equipment is installed incorrectly. Never exceed the lifting capacity of pulleys and other safety devices that may be attached. When using pulleys, be sure to follow the instructions on the mounting hardware to avoid accidents.

Fixed pulley

Moving pulleys and fixed pulleys are different types of mechanical devices. The movable pulley moves with the object it is used to lift. Because it attaches to the object it is used to lift, it is great for lifting heavy objects. These devices are used in construction cranes and multipurpose elevators. There are many different types of pulleys, and their uses vary widely. Below is a brief overview of these devices.
The simplest pulley set consists of a wheel that is mounted on the ceiling. A rope is attached at one end and a person pulls at the other end. The rope is strong enough to keep a person standing while lifting weights. It takes about 200 Newtons of force to lift a 20 kg weight. In contrast, a movable pulley requires a force of 1000N, which makes it easier to lift heavy objects.
Fixed pulleys are another common lifting device. They work by using ropes and slotted wheels attached to the object to be lifted. These devices are convenient to use because they are easy to set up. Moving the scroll wheel doesn’t change direction, so it’s easier to move objects without putting too much pressure on the back. Unlike a moving rope, a moving object will feel much lighter than its actual weight.
Fixed pulleys are widely used in construction and agriculture. Fixed pulleys can help lift supplies and equipment from scaffolding. These items are often heavy and difficult to lift directly. Fixed pulleys at the top of the scaffolding will allow people at the bottom to lift objects more easily. As a result, those at the bottom are less stressed and more productive. Fixed pulleys will save time and money compared to moving ropes.
Composite pulleys combine fixed and movable pulleys to increase the power of movement. A compound pulley system uses both types of pulleys and enables a person to change direction by reversing the direction of a force. The compound pulley system will save time and effort as the user only has to put in half the effort. Unlike moving ropes, composite pulleys are easy to adjust and are the most versatile system on the market.

Blocks and tackles

A pulley block system is a rope hoist that uses a set of pulleys mounted on a frame. The blocks are arranged in a row, and the threaded rope is called a pulley. Pulley systems help amplify the tension of the rope and are common in sailboats, cranes and drilling rigs. However, these systems are not without drawbacks.
The pulley pulley system can be equipped with as many pulleys as required. This method allows a person to lift heavy objects. The pulley block system can contain the required number of pulleys to achieve the desired height. The main disadvantage of pulley systems is that they create a lot of friction on the pulley shaft.
Pulley systems use two types of pulleys. A movable pulley is attached to the load, allowing it to move with the load. On the other hand, fixed pulleys are fixed on fixed points. Therefore, a pulley block system may consist of multiple pulleys mounted on a shaft. For example, the two pulleys attached to the shaft each have their own mechanical advantages.
Several types of tackle systems have been developed in recent centuries. The most basic is the gun mount, which uses two pulleys to lift the load. The mechanical advantage of such a system is two to three times the distance required by the rope to move the load. Depending on how they’re assembled, the system can lift 400 pounds with 80 or 100 pounds of force.
Another type of pulley is a combination of multiple wheels. The wheels on pulleys are supported by a housing or frame. The chain is attached to the pulley, and the rope is pulled to lift it. A combined pulley system will have multiple wheels. As the load increases, the force on the pulley also increases. This approach is generally more expensive than intercept and intercept systems.

editor by czh 2022-12-31