Solution Description
aluminium Stainless Metal Electricity Grip Gt2 Gt2 Htd Toothed Belt Idler Metric Gear Modest Standard Measurements Powge Adjustable Speed Timing Pulley
pulley device
1) V-Belt pulleys for taper bushes
SPZ
|
SPA
|
SPB
|
SPC
|
two)V-belt pulleys with solid hub
SPZ
|
SPA
|
SPB
|
SPC
|
3) Adjustable Pace V-belt pulleys prebored and for taper bushes
Variety | Profile |
5VS092-1 | 10X6 SPZ |
5VS093-one | 10X6 13X8 |
5VS108-one | 10X6 13X8 SPZ SPA |
5VS120-one | 10X6 13X8 SPZ SPA |
5VS138-one | 10X6 13X8 SPZ SPA |
5VS159-1 | 10X8 SPA |
5VS180-1 | 10X8 17X11 SPA SPB |
5VS120-two | 10X6 thirteen X8 SPZ SPA |
5VS138-2 | 10X6 13 X8 SPZ SPA |
5VS159-two | 13X8 SPA |
5VS180-two | 13X8 17X11 SPA SPB |
5VS200-two | 13X8 17X11 SPA SPB |
5VS250-two | 13X8 17X11 SPA SPB SPC |
Locking bushings are the most convenient and economical approach of securing a element to a mating shaft with out the use of any specific resources. Tapered bushings speedily align or lock a pulley, sprocket, or toothed coupling to the travel shaft. Tapered bushings are presently equipped with the needed holes, keyways, tapped holes, and set screws, conserving time and income in the course of machining. Tapered locking bushings are reusable following substitution, and EP offers not only a variety of normal bushings but also customized metric or imperial bores or keyways to meet up with customer-distinct wants. Bushings are manufactured of metal or cast iron.
Set up 1.1. Clear all oil, dust and paint from shafts, bushing holes, bushing exterior and holes of factors (sprockets, pulleys, and so forth.). Insert the bushing into the assembly. 3. Match the pattern of holes, not threaded holes (each gap is threaded on one facet only). Insert the socket head cap screws or screws into the half-threaded holes shown in the impression below. Put in the assembly on the shaft. 4. Convert the torque placing or include screw* to the advisable torque location in the diagram under. Fill any unfilled holes with grease.