Solution Description
Pre-Machined Taper Bushes Limitless Solitary V-Shaped Groove Ribs Multi-Ribbed Pulley with Pilot or Taper Bore
V- belt pulley of various types ( according to kind and width of belts). The content utilized is solid iron EN-GJL-250 UNI EN 1561, and for only a number of sorts it is steel C45 E UNI EN 10083-1. They have a tiny prebore that can be machined according to customers’ requirements. In addition the most widespread sorts are available also with taperlock bore.
European standards :
a) V-belt pulley for taper bushing: SPZ, SPA, SPB, SPC, up to 10 grooves
b) Adjustable speed V-belt pulleys and variable speed pulleys
c) Flat belt pulleys and conveyor belt pulleys
· American standard:
a) Sheaves for taper bushing: 3V, 5V, 8V
b) Sheaves for QD bushings: 3V, 5V, 8V
c) Sheaves for split taper bushing: 3V, 5V, 8V
d) Sheaves for 3L, 4L or A, and 5L or B belts: AK, AKH,2AK, 2AKH, BK, BKH,2BK, 2BKH, 3BK
e) Adjustable sheaves: poly V-pulley, multi-pitch H, L, J, K and M
· Bore: pilot bore, finish bore, taper bore, bore for QD bushing
– Parts can be made according to drawings and/or samples
· we can offer you the rang measurement diameter 62MM~2000MM
Related goods
Connected items:
Company:
Clear the shaft, the interior and outer holes of the bushing, and the internal hole of the hub. Remove any oil, paint or dirt, place the bushing on the hub, and match the half holes to make full holes (every total gap will only be threaded on a single facet). Lightly oil the threads and details of set screws or the threads and heads of cap screws. Loosely location the screws in the threaded holes on the hub facet. Make confident the bushing is free of charge on the hub. Snap the assembly onto the shaft and place it in the sought after situation. Tighten the screws alternately and evenly until finally all are limited 5. Hammer the big end of the bushing with a hammer and block or socket to avoid hurt. The screw can now be turned a bit to the specified torque placing. Repeat this alternating hammering and screw retightening till the specified torque is achieved. Fill all holes with grease to take away dust.
