Item Description

In depth Item Description

V-Pulley, V-Belt Pulley, Timing Pulley, Taper bush Pulley, Pilot Pulley, from a single groove to eight groove, personalized Pulle

Pulley:
one. V-belt pulley:
European Common: V-belt pulley for taper bushes: SPZ, SPA, SPB, SPC, up to ten grooves
American Normal: Sheaves for taperbushes and QD bushes: 3V, 5V, 8V
Bore: Pilot bore, end bore, taper bore, bore for QD bush

two. Versions: L037, L050, L075, L100, H075, H100, H150, H200, H300, XH200, XH300, XH400
HTD: 3M-09, 3M-15, 5M-09, 5M-fifteen, 5M-twenty five, 8M-20, 8M-30, 8M-fifty, 8M-85, 14M-40, 14M-55, 14M-eighty five, 14M-a hundred and fifteen, 14M-one hundred seventy, T2.5, T5, T10, T20, AT2.5, AT5, AT10, AT20 Pilot bore, taper bore, QD bore
Substance: 1045 metal, aluminum and stainless metal
Floor finish: Black oxidized phosphate, anodized, zinc-plated
Normal toothed bars are also accessible.

Install 1.1. Clear all oil, grime and paint from shafts, bushing holes, bushing exterior and holes of elements (sprockets, pulleys, etc.). Insert the bushing into the assembly. 3. Match the pattern of holes, not threaded holes (every gap is threaded on a single facet only). Insert the socket head cap screws or screws into the 50 %-threaded holes demonstrated in the picture below. Set up the assembly on the shaft. 4. Change the torque setting or protect screw* to the suggested torque placing in the diagram under. Fill any unfilled holes with grease.