TB 1610 tapered bushings can be employed in a selection of industrial applications. For fixing regular and non-normal V-belts, timing smoothing wheels, sprockets, TB hubs, couplings and other parts.
Cleanse the shaft, the internal and outer holes of the bushing, and the interior gap of the hub. Remove any oil, paint or dust, area the bushing on the hub, and match the fifty percent holes to make full holes (every full hole will only be threaded on 1 aspect). Lightly oil the threads and details of set screws or the threads and heads of cap screws. Loosely spot the screws in the threaded holes on the hub facet. Make positive the bushing is cost-free on the hub. Snap the assembly on to the shaft and position it in the desired placement. Tighten the screws alternately and evenly till all are limited 5. Hammer the massive conclude of the bushing with a hammer and block or socket to steer clear of damage. The screw can now be turned a bit to the specified torque location. Repeat this alternating hammering and screw retightening until finally the specified torque is attained. Fill all holes with grease to take away dirt.