Item Description

Comprehensive Solution Description

V-Pulley, V-Belt Pulley, Timing Pulley, Taper bush Pulley, Pilot Pulley, from 1 groove to 8 groove, tailored Pulle

Pulley:
1. V-belt pulley:
European Standard: V-belt pulley for taper bushes: SPZ, SPA, SPB, SPC, up to ten grooves
American Normal: Sheaves for taperbushes and QD bushes: 3V, 5V, 8V
Bore: Pilot bore, complete bore, taper bore, bore for QD bush

2. Designs: L037, L050, L075, L100, H075, H100, H150, H200, H300, XH200, XH300, XH400
HTD: 3M-09, 3M-fifteen, 5M-09, 5M-15, 5M-25, 8M-20, 8M-30, 8M-fifty, 8M-85, 14M-40, 14M-55, 14M-eighty five, 14M-one hundred fifteen, 14M-one hundred seventy, T2.5, T5, T10, T20, AT2.5, AT5, AT10, AT20 Pilot bore, taper bore, QD bore
Material: 1045 metal, aluminum and stainless metal
Floor complete: Black oxidized phosphate, anodized, zinc-plated
Regular toothed bars are also accessible.

What is the goal of the tapered bushing? Tapered bushings are commonly used to mount pulleys, sprockets and pulleys on shafts. They are split, have no flange bushings, use screws to keep the shaft, and give excellent clamping drive. Tapered bushings are frequently utilised for recessed ceiling lights because they have an even mounting spacing and, if installed accurately, they are extremely powerful in higher torque apps.
Put in 1.1. Thoroughly clean all oil, grime and paint from shafts, bushing holes, bushing exterior and holes of elements (sprockets, pulleys, and so forth.). Insert the bushing into the assembly. 3. Match the pattern of holes, not threaded holes (each gap is threaded on one particular facet only). Insert the socket head cap screws or screws into the 50 %-threaded holes shown in the image below. Install the assembly on the shaft. 4. Transform the torque location or cover screw* to the advised torque placing in the diagram under. Fill any unfilled holes with grease.